The FPC-9000-V1 fanless In-Vehicle Box PC is based on Intel Xeon E3 6th/7th Generation Core i7/i5/i3 CPU and can be equipped with DDR4 SO-DIMM 2400MHz SDRAM with up to 32 GB capacity. The system provides 2 2.5” SATA3 6Gb/s drive bays (1 internal, 1 external) and 1 CFast socket (outside accessible). In terms of I/O elements and expansion options, the FPC-9000-V1 offers 2 serial ports, 3 GbE LAN ports, 4 802.3af Gigabit PoE ports (by M12 connectors), 6 USB 3.0 ports, 6 SMA connectors for external antennas, 2 mini PCIe slots (interconnected with SIM card sockets for optional Wi-Fi/BT/3G/LTE/GPS), 1 mini PCIe slot for optional Wi-Fi/BT/GPS (PCIe + USB 2.0, half size) and 1 M.2 B-Key socket (interconnected with SIM card socket for optional LTE module). The device also provides a wide temperature range (-40°C-70°C).


Key Features

  • Fanless Design
  • Wide Range DC Power Input (9~36V)
  • Wide temperature range from -40°C to +70°C
  • 2 x RS-232/422/485 and 8-bit isolated DIO
  • 4 x 802.3af Gigabit PoE ports by M12 connectors
  • RTC Battery service windows Support
  • 3 x mPCIe slots for Optional WiFi/BT/3G/4G/GPS Modules
  • 1 x M.2 (NGFF) B-Key(2242) socket for optional LTE Module
  • 3 x SIM card sockets
  • 2 x reserved DB9 connectors(CN1/2) for optional Serial Ports or CAN BUS

Share this product

Additional information


Intel® Xeon® E3/6th & 7th generation Core™ i7/i5/i3 processor in LGA1151 socket


Intel® C236


2 x 260-pin DDR4 SO-DIMM sockets, supporting 2400 MHz SDRAM up to 32GB

Watchdog Timer

1~255 levels reset

LAN Chipset

1 x Intel® i219LM PCIe controller w/ iAMT 11.0(except i3)
2 x Intel® WGI211AT GbE controllers
4 x Intel® WGI211IT GbE controllers for PoE

Storage Type

1 x CFast socket, can be outside accessible
1 x external 2.5” SATA3 6Gb/s Drive Bay
1 x internal 2.5” SATA3 6Gb/s Drive Bay


Integrated Intel® HD Graphics


6 x USB 3.0 ports, front side


6 x SMA-female connectors’ holes for external antennas

Serial Port

2 x DB-9 male connectors (2 x RS-232/422/485), rear side


1 x M12-male 4P connector, D-code


3 x RJ-45 ports for GbE, front side
4 x M12-male 8P connector, IP67 for PoE, A-coded, rear side (with total 30W power budget)

Expansion Bus

1 x M.2 (NGFF) B-Key(2242) socket interconnected with SIM card socket for optional LTE module
1 x mini-PCI Express slot for optional Wi-Fi/BT/GPS (PCIex1+USB2.0, Half Size)
2 x mini-PCI Express Slots interconnected with SIM card sockets for optional Wi-Fi/BT/3G/LTE/GPS (PCIex1+USB2.0, Full Size)


3 x Serial ATA ports with 600MB/s HDD transfer rate


8-bit digital I/O, 4-in/4-out w/ 1 x DB-9 male connector, 2KV isolated protection, rear side

Power and Mechanical
Power input

DC 9 ~ 36V input (w/ 4-pin DC input terminal block,combining remote power on/off switch)

Power Consumption

Max. 120W (w/o I/O card)

Ignition Switch

2-pin teminal block : IGN, GND

OS and Certifications

CE, FCC Class A, E13 Mark

Physical and Environmental
Storage temperature

-40 ~ 85°C (-40 ~ 185°F)

Operating temperature

-40 ~ 60°C, ambient w/ air flow, w/ 35W TDP CoreTM i CPU
-40 ~ 70°C, ambient w/ air flow, w/ Xeon™ E3- 1268L-V5
(CPU throttling may be happened while it run full loaded)

Operating humidity

10 ~ 95% @ 70°C (non-condensing)


Support wall-mount


Operating 40G (11ms), Non-operating 60G with SSD


3 Grms/5~500Hz/random operation w/ SSD

Dimensions (WxDxH)

225 x 292 x 90 mm (8.86" x 11.50" x 3.54")


6.4kg (14.1Ib)


Aluminum alloy

Video Port

1 x DB-15 female connector for Analog RGB, Max. resolution : 1920 x 1080 @ 60Hz
1 x DVI-D female connector for digital video output, Max. resolution : 1920 x 1080 @ 60Hz

OS Support

Windows 10 IOT (For 6th/7th Gen Intel CPU)
Windows 7 / Windows8.1 ( For 6th Gen Intel CPU)


Barebone Fanless In-Vehicle BOX PC for Xeon® E3/6th &7th Gen. Core™/i7/i5/i3 35W CPU, w/o expansion(CPU-RAM-SSD-OS by CTOS*)

Get a quote

Get a free quote, we will respond to your request as soon as possible

Your inquiry was sent successfully

Thank you for your inquiry

Your RMA was sent successfully

We will contact you as soon as possible


Subscribe to more news